Cricut® Project Center
Coat Hanger: Create a Critter 2 Sneak Peek
Juloubeth (1 Project)
Project skill level: moderate
Project time: 1 hour to 2 hours
Project tags: Home Décor/Accents Organization Wall Décor/Wreaths/Banners Teacher Gifts/Cards Gifts
Save project as a favorite 4 Faves
OTHER MATERIALS NEEDED
- laminate flooring remnant
- spray paint - your choice of color
- remnant decorative paper - your choice
- craft glue
- black pen or marker
- door/drawer knobs
- electric drill and bits
- small cup hooks
- needlenose pliers
- remnant leather strap string ribbon
STEP-BY-STEP How-TO INSTRUCTIONS
Using your craft glue, glue the birds to your spray painted board where you want them. Let them dry. If you want to protect your project, now is the time to spray on a clear coat of something like polyurethane or something. I did not use anything on this one.
While you have your drill out, change to your smallest drill bit and drill pilot holes in the top edge a couple inches away from the sides for the cup hooks to screw into later.
NOTE: If you are using laminate flooring, it is thinner than a cabinet door. This means that the screws that come with the knobs for cabinets will probably be too long. You will need to get shorter screws. I used 8/32 by 1/2 inch screws that I got at the hardware store.