Cricut® Project Center



Name Wall Art


profile
Design by: Sixty7horse (1 Project)
Project skill level: easy
Project time: 1 hour to 2 hours
Project tags: Home Décor/Accents Photos/Frames/Boards Wall Décor/Wreaths/Banners Girl Baby Cards Baby Décor Gifts Kids Crafts Home

Child's name on white foam board

CRICUT ®: WHAT WAS USED

OTHER MATERIALS NEEDED

  • adhesive
  • foam board cut 19 x 10
  • pink striped paper
  • black card stock
  • Pink card stock
  • purple card stock
  • pink and purple ribbon
  • Brown card stock

STEP-BY-STEP How-TO INSTRUCTIONS

This is my very first project that I made for my grand daughter's room.

Cut out your letters using Cricut Sophisticated Cartridge. I used font 1 and I used capital and small letters for her name.
Cut the pink striped paper to fit the entire board. Cut the brown cardstock to fit the length of the board. I trimmed it to leave 4" on the top and bottom side.
Cut pink and purple ribbon the length of the board and glue to the top and bottom of the brown cardstock to outline.
Next place the letters along the length of the board in the center of the brown card stock.
Cut the chosen animals from Create a Critter cartridge. I cut them at 3". I chose pink and purple to stay within the colors of her room. You can use traditional colors if you like. I also cut 2 dragonflies 3" from Boho Graphics Iron On Cartridge. Place them in various positions and glue down.
I then took a piece of the pink and purple ribbon used to outline the brown and glued to the back of the board with my ATG gun and made a hanger.

Step 1

This is my very first project that I made for my grand daughter's room.

Cut out your letters using Cricut Sophisticated Cartridge. I used font 1 and I used capital and small letters for her name.

Step 2

Cut the pink striped paper to fit the entire board. Cut the brown cardstock to fit the length of the board. I trimmed it to leave 4" on the top and bottom side.

Step 3

Cut pink and purple ribbon the length of the board and glue to the top and bottom of the brown cardstock to outline.

Step 4

Next place the letters along the length of the board in the center of the brown card stock.

Step 5

Cut the chosen animals from Create a Critter cartridge. I cut them at 3". I chose pink and purple to stay within the colors of her room. You can use traditional colors if you like. I also cut 2 dragonflies 3" from Boho Graphics Iron On Cartridge. Place them in various positions and glue down.

Step 6

I then took a piece of the pink and purple ribbon used to outline the brown and glued to the back of the board with my ATG gun and made a hanger.

Awards
See available awards

SHOWCASED - A FEATURED PROJECT
SHOWCASED - A FEATURED PROJECT
PRIZED - PROJECT FAVED 25+ TIMES
PRIZED - PROJECT FAVED 25+ TIMES
CELEBRATED - PROJECT FAVED 50+ TIMES
CELEBRATED - PROJECT FAVED 50+ TIMES
  • PRIZED - PROJECT FAVED 25+ TIMES

Related Projects

COMMENTS

Add your comments