Cricut Forums
»
Cricut Community
»
General Chat.
»
Cricut Chat
»
These are not the answers you’re looking for
Groups: Circle Moderator, Cricut Community Moderator, Registered Joined: 7/6/2012(UTC) Posts: 84  Location: In the Cricut world Thanks: 3 times
Was thanked: 1758 time(s) in 76 post(s)
|
I can understand that Gypsy linking has been a much requested feature and the wait has been frustrating. This is a frustrating issue for us as well as we have been working hard to resolve the issue. We want to be able to say “it is working!” but we can’t do that quite yet. We are however very, very close. We have a solution and have started the testing phase. This testing will take time because we want to be as thorough as possible. We don’t have an exact time frame of when we will be able to release this, but we want to make sure that everyone will be able to access content on Gypsy and in Cricut Craft Room. We are almost there. Edited by user Tuesday, April 16, 2013 5:28:08 PM(UTC)
| Reason: Not specified
|
 45 users thanked Nathan for this useful post.
|
Tryna* on 2/28/2013(UTC), Narelle on 2/28/2013(UTC), Happishay on 2/28/2013(UTC), Tennis53 on 2/28/2013(UTC), susancrafts on 2/28/2013(UTC), tugglem on 2/28/2013(UTC), nightmare/fan on 2/28/2013(UTC), Sing&Scrap on 2/28/2013(UTC), RebeccaG. on 2/28/2013(UTC), Kris Dietz on 2/28/2013(UTC), CocoasMom on 2/28/2013(UTC), garagesaler on 2/28/2013(UTC), Stipple45 on 2/28/2013(UTC), Khrista on 2/28/2013(UTC), Liza/shylalp on 2/28/2013(UTC), ArcadiaFLNative on 3/1/2013(UTC), albrennick on 3/1/2013(UTC), gonescrappin' on 3/1/2013(UTC), JoJoy on 3/1/2013(UTC), HappyScrapper64 on 3/1/2013(UTC), Godot's Girl on 3/1/2013(UTC), loves2Bscrappin on 3/1/2013(UTC), MarleneFair on 3/1/2013(UTC), Mommer on 3/1/2013(UTC), LoriAnderson13 on 3/1/2013(UTC), craftieoma on 3/1/2013(UTC), Dragonfly50 on 3/2/2013(UTC), Josie0602 on 3/2/2013(UTC), CricketCMV on 3/2/2013(UTC), RunnerKellie on 3/2/2013(UTC), Mamawof5 on 3/2/2013(UTC), jodie R on 3/2/2013(UTC), Sage Taber on 3/2/2013(UTC), BarbPoll on 3/3/2013(UTC), papercrazedcrafter on 3/3/2013(UTC), The Soap Lady on 3/4/2013(UTC), bethdoc on 3/4/2013(UTC), mama nay on 3/5/2013(UTC), Sawkat66 on 3/7/2013(UTC), deonnahotovec on 3/8/2013(UTC), JeanneLee on 3/8/2013(UTC), ♥Buggy♥ on 3/10/2013(UTC), ditskid on 3/13/2013(UTC), cre8 on 3/17/2013(UTC), EvangeliaPanagakos on 4/9/2013(UTC)
|
|
|
Medals:  Groups: Circle Member, Registered Joined: 7/12/2008(UTC) Posts: 20,586 Location: Alpharetta Georgia Thanks: 6901 times
Was thanked: 14947 time(s) in 6968 post(s)
|
Thanks! Hopefully, it won't be much longer and Gypsy users can use CCR to it's potential.
|
1 user thanked scrapalette for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member Joined: 3/5/2009(UTC) Posts: 2,906 Thanks: 1805 times
Was thanked: 4382 time(s) in 1030 post(s)
|
Ok I had to laugh when I saw the Title of your post Nathan. Just change the word "answers" to "droids" and Star Wars popped in my mind. lol Thanks for the update. I look forward to being able to link all my Gypsy linked cartridges to CCR. I also hope they will be able to link the free cartridges that we received on our Gypsy's during a promotion. Smiley Cards, Indie Art, Printing Press, Black Letter, Tags, bags, boxes and more,and Christmas. I only owned the actual cartridge to half of these and now if I remember right all of them are retired or exclusive to the Gypsy. Edited by user Thursday, February 28, 2013 7:29:45 PM(UTC)
| Reason: Not specified
|
4 users thanked MultiCrafter Amy for this useful post.
|
|
|
|
Groups: Registered
Joined: 5/20/2007(UTC)
Posts: 1,189
Location: central Florida
Thanks: 9 times
Was thanked: 318 time(s) in 267 post(s)
|
Thank You for the update Nathan! Yes, the wait has been long, but better to wait a bit longer and have it work correctly, right. Thanks to everyone from PC for working on this problem. 
|
1 user thanked nancyh for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member Joined: 4/2/2008(UTC) Posts: 334 Location: Michigan Thanks: 120 times
Was thanked: 229 time(s) in 118 post(s)
|
Thanks for giving us an update! I really glad that this is still in the works and can't wait until it is good to go and glad they are waiting for it to work properly!
Jeanne
|
1 user thanked nightmare/fan for this useful post.
|
|
|
|
Medals: Groups: Circle Member, Registered Joined: 5/9/2010(UTC) Posts: 918 Location: Louisville, KY Thanks: 529 times
Was thanked: 595 time(s) in 312 post(s)
|
Thanks for the update. Really nice to know that this is being worked on and we're getting closer. I definitely support thorough testing and I'll hang in there with you til it's right!
|
1 user thanked Sing&Scrap for this useful post.
|
|
|
|
Medals: Groups: Circle Member, Registered Joined: 7/19/2008(UTC) Posts: 795 Location: Arcadia, Florida Thanks: 1494 times
Was thanked: 596 time(s) in 344 post(s)
|
Thanks for the update Nathan. It will be very helpful to have all my cartridges linked to CCR. I have way too many (I have lost count - 350 plus??) and having them in CCR would be SO beneficial to me!!
I do appreciate, as others have stated, that we do want it to work properly, so thank you and all of the PC IT team for wanting that as well.
We love our products and want to be able to use them to the fullest of their capabilities, so that is why we are anxious for correct updates. (Too many machines to list, but when updates go bad, it is a nightmare) I am one of the cautious people who are wary of updates, and need them to be right, as I am not a very capable hi-tech person. I am very grateful for the MB members who are that help others with issues.
Thanks for keeping us informed and we appreciate you, Mallie, Gena, and any others I might have missed.
Penny
|
|
|
|
|
|
Medals: Groups: Registered, Circle Member
Joined: 8/28/2009(UTC)
Posts: 43
Location: South Carolina
Thanks: 19 times
Was thanked: 16 time(s) in 12 post(s)
|
That will be great! Being able to use all my cartridges in CCR will make me take CCR seriously and then maybe I will figure out how to use it. LOL
|
|
|
|
|
|
Medals: Groups: Registered, Circle Member
Joined: 5/31/2011(UTC)
Posts: 1,689
Location: Kankakee IL
Thanks: 256 times
Was thanked: 963 time(s) in 547 post(s)
|
I would love to test it for you!
|
2 users thanked melodylanedesigns for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member Joined: 6/26/2008(UTC) Posts: 7,169 Location: In My Craftroom, NJ Thanks: 7026 times
Was thanked: 4674 time(s) in 2971 post(s)
|
Originally Posted by: melodylanedesigns  I would love to test it for you!  That's the first thing I thought when I saw Nathan's post! Thank you for giving us an update. I want to like and use the CCR, but I have gotten lazy about pulling out my carts because of my Gypsy  and it might make the CCR more appealing to me.
|
1 user thanked gonescrappin' for this useful post.
|
|
|
|
Medals: Groups: Circle Member, Registered
Joined: 1/28/2011(UTC)
Posts: 7,502
Location: Virginia
Thanks: 20660 times
Was thanked: 15768 time(s) in 4889 post(s)
|
Just wondering if this means we will be able to link the cartridges already linked to our Gypsy to CCR without physically having the Gypsy.  My Gypsy's USB port broke, so...
|
3 users thanked SaraAndrews1 for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member
Joined: 1/17/2008(UTC)
Posts: 1,326
Thanks: 535 times
Was thanked: 1018 time(s) in 433 post(s)
|
https://www.cricut.com/f...Dump-Us.aspx#post1581690Nathan Wrote: I have remained pretty silent because there are several important questions that people want answered... Cricut Imagine (which we posted about yesterday) and the Gypsy. While we are making progress towards getting you answers, people don't want to hear me say "we're working on it." https://www.cricut.com/f...-Nathan.aspx#post1564986Nathan Wrote: What ever happens, we are committed to supporting these products. We are currently and actively looking for solutions to Gypsy linking, Gypsy hardware issues and Imagine CCR connection. Right now we are not able to say when the fix will be available because we need to understand what it will take to make the fix, but I'm told that we are close to knowing how to do it and then I'll be able to give a time frame. https://www.cricut.com/f..._Update.aspx#post1548164Nathan Wrote: I wanted to give an update on what has been going on in the Cricut World. While I don't have definite answers yet in regards to the hot topics (Gypsy and Imagine) we are making progress. https://www.cricut.com/f...nswers-to-questions.aspxNathan Wrote: b) We are also in the process of developing a linking process to link the Gypsy to the Craft Room. Once programing and testing is done we will make this available to all customers. https://www.cricut.com/f...nswers-to-questions.aspxNathan Wrote: a) We are actively working on a way to link your gypsy to Craft Room. As soon as programming is complete and all necessary testing is done we will release it to the public. https://www.cricut.com/f...-update.aspx#post1512659Nathan Wrote: We did have a meeting about the Gypsy last week as well. Although I don't have any news to report except that we are continuing to move forward. I know "we're working on it" is not a great answer, but I am hoping to have some news this month early next month. With all due respect, Nathan, actions speak louder than words....... and gypsy users have been waiting over 2 years for this fix!!! The fix for the imagine was to discontinue it....... This is why I have lost total faith and respect for PC and anything PC related!
|
3 users thanked GracefulGrammar for this useful post.
|
|
|
|
Medals: Groups: Circle Member, Registered Joined: 3/13/2011(UTC) Posts: 905 Location: Spokane Thanks: 1137 times
Was thanked: 1413 time(s) in 363 post(s)
|
Originally Posted by: MultiCrafter Amy Ok I had to laugh when I saw the Title of your post Nathan. Just change the word "answers" to "droids" and Star Wars popped in my mind. lol
Thanks for the update. I look forward to being able to link all my Gypsy linked cartridges to CCR. I also hope they will be able to link the free cartridges that we received on our Gypsy's during a promotion. Smiley Cards, Indie Art, Printing Press, Black Letter, Tags, bags, boxes and more,and Christmas. I only owned the actual cartridge to half of these and now if I remember right all of them are retired or exclusive to the Gypsy. LOL!! I though the same thing!!!! How funny!!!
|
2 users thanked Ken's Kreations for this useful post.
|
|
|
|
Groups: Registered
Joined: 8/1/2006(UTC)
Posts: 1,697
Location: West Jordan Utah
Thanks: 16 times
Was thanked: 807 time(s) in 420 post(s)
|
Originally Posted by: GracefulGrammar https://www.cricut.com/forum/cricut-community_postsm1581690_Did-Nathan-Dump-Us.aspx#post1581690 Nathan Wrote: I have remained pretty silent because there are several important questions that people want answered... Cricut Imagine (which we posted about yesterday) and the Gypsy. While we are making progress towards getting you answers, people don't want to hear me say "we're working on it." https://www.cricut.com/f...-Nathan.aspx#post1564986Nathan Wrote: What ever happens, we are committed to supporting these products. We are currently and actively looking for solutions to Gypsy linking, Gypsy hardware issues and Imagine CCR connection. Right now we are not able to say when the fix will be available because we need to understand what it will take to make the fix, but I'm told that we are close to knowing how to do it and then I'll be able to give a time frame. https://www.cricut.com/f..._Update.aspx#post1548164Nathan Wrote: I wanted to give an update on what has been going on in the Cricut World. While I don't have definite answers yet in regards to the hot topics (Gypsy and Imagine) we are making progress. https://www.cricut.com/f...nswers-to-questions.aspxNathan Wrote: b) We are also in the process of developing a linking process to link the Gypsy to the Craft Room. Once programing and testing is done we will make this available to all customers. https://www.cricut.com/f...nswers-to-questions.aspxNathan Wrote: a) We are actively working on a way to link your gypsy to Craft Room. As soon as programming is complete and all necessary testing is done we will release it to the public. https://www.cricut.com/f...-update.aspx#post1512659Nathan Wrote: We did have a meeting about the Gypsy last week as well. Although I don't have any news to report except that we are continuing to move forward. I know "we're working on it" is not a great answer, but I am hoping to have some news this month early next month. With all due respect, Nathan, actions speak louder than words....... and gypsy users have been waiting over 2 years for this fix!!! The fix for the imagine was to discontinue it....... This is why I have lost total faith and respect for PC and anything PC related! Good post! ya know, it's not really that they haven't been able to get it worked out...the part that has irritated everyone is that they said AT THE BEGINNING of CCR that the linking would work.....
I just want PC to advertise what is real and leave the future possibilities unsaid! Then we all realistically know what to expect.
|
5 users thanked GrammyCris for this useful post.
|
|
|
|
Groups: Registered, Circle Moderator, Cricut Community Moderator
Joined: 11/5/2012(UTC)
Posts: 219
Location: Utah
Thanks: 110 times
Was thanked: 793 time(s) in 144 post(s)
|
Apologies to those that still want something tangible. We know that we have said "Coming Soon" for too long, and we certainly debated whether to share that we ARE closer-- but we decided that we needed to share that we HAVE been working... and we are very close... but we are testing and testing to ensure that we kept you all waiting with good reason.
Thank you for all of the support-- I'm sharing it with our technical team to keep them motivated!
Mallie @ Cricut
|
9 users thanked CricutMallie for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member Joined: 5/6/2008(UTC) Posts: 8,532  Location: Edmonton, Alberta Thanks: 4685 times
Was thanked: 3364 time(s) in 1966 post(s)
|
Originally Posted by: GrammyCris Good post! ya know, it's not really that they haven't been able to get it worked out...the part that has irritated everyone is that they said AT THE BEGINNING of CCR that the linking would work.....
I just want PC to advertise what is real and leave the future possibilities unsaid! Then we all realistically know what to expect. Agreed - its called managing expectations and PC isn't very good at it. They should also under promise and over deliver...rather than the other way around.
|
1 user thanked Scrapperdee for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member Joined: 9/27/2009(UTC) Posts: 81 Location: Kansas Thanks: 28 times
Was thanked: 45 time(s) in 24 post(s)
|
Nathan,
As other's have pointed out, in the beginning of CCR, linking did work. Okay we are a bit down the road from what was. But instead of a big programing deal, why not do something much easier?
Provocraft has the ability to lock and unlock "entitlements" i.e. the right to use a cartridge.
We know this because of the free cuts every week. Which by the way is an excellent marketing ploy. Provo Craft excells in marketing!!!!
So, if unlocking is possible and we know it is, what not take the customer's registered cartridge list and unlock those entitlements? That doesn't require programing. Provocraft has access to all of our accounts, the cartridges to be registered, have to have an individual serial number, so there is no question of the registration not being accurate. This process would not involve the Gypsy at all
When I buy a cartridge, the "unlock" happens as soon as payment is verified, so the unlocking of entitlements cannot be a complicated process, or one that there is a long wait que on.
If my Gypsy dies and I fear the day is coming, I will need to send it in to get those cartridges "unlocked" and re serialized to a new Gypsy (if I can find one). So what if I make it even easier for you? What if I (and all the cutomers involved) send you our list of registered cartrs and you (Provo Craft) unlock them? Even if we had to do the work of actually sticking each card in the machine and re-linking to CCR, most of us would be willing to do that. I have a bazillion carts and I would do it.
The sad thing is, I am actually beginning to learn to use CCR but don't as much because of the hassle of having to go get a cart and stick it in the machine.
Judy In KS
|
2 users thanked JudyClarke1 for this useful post.
|
|
|
|
Medals: Groups: Circle Member, Registered Joined: 7/12/2008(UTC) Posts: 20,586 Location: Alpharetta Georgia Thanks: 6901 times
Was thanked: 14947 time(s) in 6968 post(s)
|
Originally Posted by: JudyClarke1
So, if unlocking is possible and we know it is, what not take the customer's registered cartridge list and unlock those entitlements? That doesn't require programing. Provocraft has access to all of our accounts, the cartridges to be registered, have to have an individual serial number, so there is no question of the registration not being accurate. This process would not involve the Gypsy at all
I realized you asked Nathan, but the answer to this question is that a lot of people have carts registered to their account that they have since sold. Once a cart is registered by one owner, it doesn't keep a new owner {or multiple people knowing the owner} from registering that same cart. That's why the Gypsy serial number is written onto the cart when you link it. Otherwise, the initial process could have been register your carts and link them automatically through {what was} Gypsy Sync. If it were that simple, I think PC would have done that months ago. But, whatever they have tried, hasn't worked. Their are lots of creative people on this MB, so I think if someone has an idea of what would work, they should post it. It might just be the solution.
|
1 user thanked scrapalette for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member Joined: 1/14/2010(UTC) Posts: 825 Location: Lebanon, TN Thanks: 235 times
Was thanked: 253 time(s) in 189 post(s)
|
Originally Posted by: SaraAndrews1 Just wondering if this means we will be able to link the cartridges already linked to our Gypsy to CCR without physically having the Gypsy. My Gypsy's USB port broke, so... Mine, too. I was wondering the same thing.
|
1 user thanked Beachbaylee for this useful post.
|
|
|
|
Groups: Registered
Joined: 4/3/2008(UTC)
Posts: 2
Location: Hidden Valley Lake, CA
Was thanked: 1 time(s) in 1 post(s)
|
As it is very frustrating for us not to be able to link the two programs, I am sure it is just as frustrating for you. Keep up the great work and we will look forward to being able to link the two. Have a great day!!!!
|
1 user thanked CricutAddictForever for this useful post.
|
|
|
|
Medals: Groups: Circle Member, Registered Joined: 5/3/2011(UTC) Posts: 2,244 Thanks: 1114 times
Was thanked: 1027 time(s) in 619 post(s)
|
Thank you for the update! I realize people have been waiting a long time and I can totally understand their frustrations. (I do not own a Gypsy) I know some people have gotten frustrated with what they see as a "coming soon" update post BUT I personally am glad to hear from PC even if it is that you are working on it. Work away. Work until you get it fixed for these people. I'm glad you are testing it to make sure you can get it to them in the best working order possible. Basically my point for adding my 2 cents worth here was to thank you for your continued effort AND for the update. NATHAN- Welcome back and don't be a stranger. lol D- Edited by user Saturday, March 02, 2013 3:05:49 AM(UTC)
| Reason: :)
|
2 users thanked Dragonfly50 for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member
Joined: 2/21/2009(UTC)
Posts: 10,859
Location: Illinois
Thanks: 8650 times
Was thanked: 4383 time(s) in 2921 post(s)
|
I agree with the OPs who are saying.........THANKS, NATHAN.....some news, even though it's not the news we've been wanting to hear.....IS BETTER THAN NO NEWS AT ALL. PC has my vote of confidence and I believe a lot of people now there have taken on problems of others (who have left PC) and that's not an enviable position to be in. I believe in PC. I believe you will come through for all those who have been waiting for so long. THANKS, from all of us who understand and who really want the best for everyone here and for PC.
Char
|
3 users thanked CricketCMV for this useful post.
|
|
|
|
Medals: Groups: Registered, Circle Member
Joined: 6/9/2006(UTC)
Posts: 432
Location: Pacific northwest
Thanks: 18 times
Was thanked: 63 time(s) in 46 post(s)
|
|
|
|
|
|
|
Medals: Groups: Registered, Circle Member Joined: 9/27/2009(UTC) Posts: 81 Location: Kansas Thanks: 28 times
Was thanked: 45 time(s) in 24 post(s)
|
Thanks Scrapalette, for your helpful answer. Maybe my solution WAS too simple. As for PC thinking of it long ago if it were possible.....maybe not so much. I don't mean that my idea is possible but having lived through PC's fixes and changes since the Gypsy launch, I see their efforts much like turning an ocean liner. It can be done, but slooooooowly, needs lots of room.
I guess I leaned toward the simple because it seems simple for them to take my money VERY quickly, unlock carts very quickly, market great ideas with panache and hoopla.
At first CCR was bewildering to me and now I really like it and would like to use it more with my many cards and would like to use blending two carts. I can do all that but again using the ocean liner analogy, it's slooooow, awkward and therefore not as enticing, which brings me back to what's in it for PC. Those free cuts are nice and I would buy more if I were in CCR more, but if it's not as easy to use because of the many unlinked carts, it isn't just the user that is losing out on something that does work, it's PC too!
Judy in KS
|
1 user thanked JudyClarke1 for this useful post.
|
|
|
|
Groups: Registered
Joined: 4/26/2008(UTC)
Posts: 64
Was thanked: 27 time(s) in 19 post(s)
|
Thank goodness! I can't go much longer without going insane.
|
|
|
|
|
|
Groups: Registered
Joined: 6/8/2009(UTC)
Posts: 1,355
Location: ca
Thanks: 392 times
Was thanked: 513 time(s) in 413 post(s)
|
Originally Posted by: SaraAndrews1 Just wondering if this means we will be able to link the cartridges already linked to our Gypsy to CCR without physically having the Gypsy. My Gypsy's USB port broke, so... This also happened to me and I would love to be able to get them all linked to ccr.
|
|
|
|
|
|
Groups: Registered
Joined: 10/16/2007(UTC)
Posts: 1,008
Location: Illinois
Thanks: 129 times
Was thanked: 282 time(s) in 210 post(s)
|
I would love to see this get resolved because I linked all my carts to CCR because I was told to do it when it was first rolled out. Now I can't link to CCR and have limited use. I'm looking for to getting this resolved.
|
|
|
|
|
|
Groups: Registered
Joined: 12/14/2008(UTC)
Posts: 1,312
Location: Florida
Thanks: 311 times
Was thanked: 792 time(s) in 396 post(s)
|
Originally Posted by: scrapalette I realized you asked Nathan, but the answer to this question is that a lot of people have carts registered to their account that they have since sold. Once a cart is registered by one owner, it doesn't keep a new owner {or multiple people knowing the owner} from registering that same cart. That's why the Gypsy serial number is written onto the cart when you link it. Otherwise, the initial process could have been register your carts and link them automatically through {what was} Gypsy Sync.
If it were that simple, I think PC would have done that months ago. But, whatever they have tried, hasn't worked. Their are lots of creative people on this MB, so I think if someone has an idea of what would work, they should post it. It might just be the solution. I agree with Judy that PC is making this needlessly complicated when there is a simple solution. While it doesn't make sense to use the registered carts for the reasons Scrapalette mentions, it does make sense to use the list of cartridges that are linked to an individual's Gypsy. This preserves having a cart able to link to CCR only once since you already can not link a cart to CCR when it has previously been linked to a Gypsy. And we already had at one time, and have since lost, access to those Gypsy promo cartridges in CCR. Why not throw us a bone and at least give us those back?
|
1 user thanked Kut-n-Print for this useful post.
|
|
|
|
Groups: Registered
Joined: 4/19/2010(UTC)
Posts: 132
Location: UK
Thanks: 42 times
Was thanked: 23 time(s) in 19 post(s)
|
Great I appreciate that these things have to be tested to avoid the fiasco that we had when CCR was first rolled out to the masses but WHEN OH WHEN are Cricut going to resolve the issue of linking your Gypsy to the Create. Since mine went wrong last year and struggling to revert my firmware back to 1.54 (now done) I'm afraid that I'll NEVER use the two together again as it stands. A number of posts relate to this problem on the Create board but no one ever answers!!  xxsue
|
|
|
|
|
|
Groups: Registered
Joined: 8/29/2006(UTC)
Posts: 1,288
Thanks: 219 times
Was thanked: 301 time(s) in 222 post(s)
|
I appreciate the thought but I will wait and see. At this time when not much gets fixed, I am not holding my breath. I do hope it does. We certainly need more things fixed and proof of it too. BJR.
|
|
|
|
|
|
Cricut Forums
»
Cricut Community
»
General Chat.
»
Cricut Chat
»
These are not the answers you’re looking for
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.