Medals:  Groups: Registered, Circle Member Joined: 12/8/2010(UTC) Posts: 934  Location: California Thanks: 293 times
Was thanked: 444 time(s) in 289 post(s)
|
I am working on several projects and swaps and I have NO idea what possessed me to mess with my Imagine as for the most part she has been reliable with CCR. Anyway I decided to update the driver since I keep getting the message to do so. I t updated my Imagine. And now when I go to Print or print and cut through ccr it takes F-o-r-e-v-e-r to send it to the I. Then once it says to follow the directions on the I screen I go to the I and the connecting screen disappears and the menu screen pops up. In CCR it looks like the project still needs to be print/cut. I have tried turning machine/computer on/off plugging in/out…. Etc… I am running 132 (or is it 137 ? I’m not at home) anyway I am stressing as I can’t get my projects done! Yikes! Any suggestions? Is there a way to reset the firmware on the Imagine?
|
|
|
|
|
|
Medals: Groups: Circle Member, Registered Joined: 5/12/2010(UTC) Posts: 5,082 Location: Southwest Washington State Thanks: 1160 times
Was thanked: 2052 time(s) in 1260 post(s)
|
Originally Posted by: couponlover  I am working on several projects and swaps and I have NO idea what possessed me to mess with my Imagine as for the most part she has been reliable with CCR. Anyway I decided to update the driver since I keep getting the message to do so. I t updated my Imagine. And now when I go to Print or print and cut through ccr it takes F-o-r-e-v-e-r to send it to the I. Then once it says to follow the directions on the I screen I go to the I and the connecting screen disappears and the menu screen pops up. In CCR it looks like the project still needs to be print/cut. I have tried turning machine/computer on/off plugging in/out…. Etc… I am running 132 (or is it 137 ? I’m not at home) anyway I am stressing as I can’t get my projects done! Yikes! Any suggestions? Is there a way to reset the firmware on the Imagine? The only way to do the firmware is to do a system format and restore which will clear it out and update it to the most current. May not solve the problem. I've done a few of them.. and only had it hang up once. Just can take a while depending on internet, watching that it doesn't time out etc. Maybe try updating CCR to the one just released and see if it works? It's working for a lot of people it looks like. Some it's not. You can always backtrack to 137 if that doesn't take care of it. Easier to do than a format and restore of your machine :) HTH :)Khrista
|
|
|
|
|
|
Groups: Registered
Joined: 5/11/2006(UTC)
Posts: 472
Location: Texas
Thanks: 58 times
Was thanked: 169 time(s) in 110 post(s)
|
My Imagine has been awesome for the last year and a half and over the last month it has been printing and not cutting alone OR in CCR so I have decided to do a system restore and it is taking a long time. I really hope it solves the problem because I do all my crafting on my Imagine and it has been SUPER frustrating lately. Also, it is always telling me to "retry" putting the mat in, the rollers aren't grabbing it properly or something, I usually have to put the mat in 3 or 4 times everytime! ARgh!
Jana
|
|
|
|
|
|
Groups: Registered
Joined: 12/27/2008(UTC)
Posts: 33
Location: South Ogden, Utah
Thanks: 39 times
Was thanked: 5 time(s) in 5 post(s)
|
Jana I am having the same problem... so fusterating!!!! "retry" putting the mat in, the rollers aren't grabbing it properly or something, I usually have to put the mat in 3 or 4 times everytime! If you figure it out please let me know... Thanks! 
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.